Bootmod3 - E85 Performance Flash Tune by Cary Jordan - S55

Bootmod3 - E85 Performance Flash Tune by Cary Jordan - S55

ESS Tuning - N55 Stage 1 ECU Performance Software - E-Chassis

ESS Tuning - N55 Stage 1 ECU Performance Software - E-Chassis

Bootmod3 - E85 Performance Flash Tune by Cary Jordan - S55

E85 has been well known for its cooling abilities higher octane and cheap from the pump cost. Take advantage of running FULL E85 Ethanol from the pump in your F8x M3/M4 a E85 flash from Cary Jordan. Your F8X is strapped down to our in-house Dynojet 224xLC and custom-tuned/datalogged on the dyno. Requires existing Bootmod3 license.

Build the ultimate tune for your S55 powered vehicle and go from stock to full race calibration, and everywhere in between, with a map switch in the provided mobile app. bootmod3 calibrates the factory vehicle modules over the OBD port in a matter of minutes in the convenience of your driveway or anywhere internet access is available.

$600.00
SKU
BM3004

E85 has been well known for its cooling abilities, higher octane, and cheap from the pump cost. Take advantage of running FULL E85 Ethanol from the pump in your F8x M3/M4 a E85 flash from Cary Jordan. Your F8X is strapped down to our in-house Dynojet 224xLC and custom-tuned/datalogged on the dyno. Requires existing Bootmod3 license.

Build the ultimate tune for your S55 powered vehicle and go from stock to full race calibration, and everywhere in between, with a map switch in the provided mobile app. bootmod3 calibrates the factory vehicle modules over the OBD port in a matter of minutes in the convenience of your driveway or anywhere internet access is available.

Stages:
 - Stage 1: ~540whp/620wtq @ 20-21psi (road-course/street tune)
 - Stage 2: ~560whp/650wtq @ 23-24psi (most popular)
 - Stage 2+: ~580whp/680wtq @ 26-27psi (for aggressive drivers, requires colder plugs)
 - Stage 3: ~700whp @ 26psi, (requires Pure Stage 2 turbos, port/methanol injection and accompanying hardware)

Features:
 - Full OBD2 flashing, no DME removal required
 - Gains of +150whp or more in a single tuning session
 - Run 100% E85 from the pump, no mixing required
 - Increased knock sensitivity (safety)
 - Increased power levels at lower boost

Requirements & Optional Features
 - Dynojet tuning required (additional cost)
 - Existing Bootmod3 License (Click here)
 - OBD ENET Cable recommended for map switching

For those without an existing Bootmod3 license, we can get you set up beforehand.

BootMod3 Standard Features (included with Bootmod3 license)
 - One OTS map/tune included with the purchase
 - Datalogging over 200 diagnostic channels, up to 40 channels concurrently
 - Datalog sharing and charting without a need to upload to 3rd party websites or apps using the mobile app or web browser
 - GTS DCT TCU (transmission) flash for maximized clutch clamping force extending life on stock and upgraded DCT clutch packs
 - Cloud based storage for map data and datalogs
 - Reverting back to stock performance map
 - Live Dash - real-time vehicle parameter monitoring via in-app gauges
 - GTS TCU Flash for DCT vehicles
 - OBD Diagnostics
 - Read and clear trouble codes in all vehicle modules
 - Reset learned adaptations (octane, knock, Valvetronic, etc)
 - ECU power reset

Note: Vehicle must be present at our facility in Anaheim, CA. Remote tuning is not available. ENET cable recommended for map switching between 91/93 octane and E85 tune.

Models Supported:
2015+ BMW F8X M3/M4

More Information
BMW Fitments F80 M3, F82/F83 M4