Vendor: Mountain Pass Performance
MPP Arastradero Rear Toe Arms for Model 3/Y take everything learned from motorsport and road car performance for over 15 years and apply it to the Tesla Model 3 and Model Y. It is important for suspension arms to be easy to adjust, have great durability even in harsh climates, and have solid bearings rather than rubber bushings for the ultimate connection to the road. We used our experience to develop the ultimate toe arms for the Model 3/Y.
If you lower your Model 3 or Model Y, you may find that you run out of adjustment of the factory toe adjuster. In addition, the factory adjustment is not very precise and difficult to lock down accurately. Our MPP toe arm yields a significant improvement in steering response and rear-end feel. Something true mountain carving enthusiasts will really enjoy.
Most aftermarket suspension arms are made using either urethane bushings, which are used because they are cheap – or spherical rod ends, which are ideal for performance but don’t last very long in sandy or salty environments. Our solution is to use an OEM production sealed bearing – delivering the performance of a spherical and the durability of an OE part. The sealed bearing is just like a ball joint, it is solid and has virtually no compliance, while being lubricated and protected from corrosion.
Rod ends tend to thread into a suspension arm, which makes them very easy to adjust – whereas a pressed in bearing offers no adjustment. Our solution is to use an offset thread turnbuckle allowing for precise adjustment. Rather than use jam-nuts – which always affect the alignment when locking down the nuts – our clamping system allows the alignment technician to perfectly set the alignment, then tighten the clamp bolts without throwing off the toe.
In addition, laser engraving indicates which way to adjust the turnbuckle to extend or retract the arm, saving any confusion for your local alignment technician, or for anyone trying to make some quick track-side changes. In fact – we’ve calibrated our arms so that 1 hex adjustment (1/6th of a turn) is almost exactly 1mm of toe change. This means that with our toe arms, you can precisely try different rear toe settings at the track and easily be able to get back to your starting point. This is an extremely powerful feature that none of our competitors are able to offer.
The turnbuckles are made from stainless steel – so they will never corrode or rust. The arms are CNC machined out of 6061-T6 aluminum, and anodized blue for durability and aesthetics.
These arms come fully assembled at set to the factory length. We always recommend using anti-seize lubricant to prevent any galvanic corrosion between the aluminum and steel. The toe-adjustment range is more than enough to cover any toe setting desired, even at any imaginable camber setting. Arms come as a pair of two and are warrantied for 3 years.
Tesla Model 3, including Performance
Tesla Model Y, including Performance
Mountain Pass PerformanceMountain Pass Performance - Arastradero Rear Upper Camber Arms - Tesla Model 3/Model Y
Mountain Pass PerformanceMountain Pass Performance - Corkscrew Front Upper Control Arms - Tesla Model 3/Model Y
SPL PartsSPL Parts - Rear Lower Traction Rods - Tesla Model 3/Model Y
SPL PartsSPL Parts - Upper Traction Links - Tesla Model 3/Model Y
SPL PartsSPL Parts - Rear Toe Links - Tesla Model 3/Model Y