Synthetic lubricant for V-3 superchargers. This special fluid is required for proper maintenance of the V-3 supercharger. Use of any other fluid will void the warranty and may cause component failure.
Fluid Level Checking Procedure
- Ensure that the .06" copper sealing washer is located on the dipstick base
- Thread the clean dipstick into the unit until it seats
- Once the dipstick has seated, remove the dipstick from the unit. Fluid should register in the crosshatched area on the dipstick
-
DO NOT OVERFILL! Drain excess fluid from the unit if it is above the maximum level on the dipstick
V-3 Maintenance Notes
- Check the supercharger fluid level using the dipstick at least every 2,500 miles
- Initial supercharger fluid change must be performed at 2,500 miles. Supercharger fluid must then be changed at least every 7,500 miles.
- Drain the fluid, re-fill the unit only with 4 oz. of Vortech supplied lubricating fluid
- Confirm proper oil level using the dipstick. DO NOT OVERFILL!
Note: For Vortech and ESS Centrifugal Superchargers.
⚠️ WARNING TO OUR CALIFORNIAN CONSUMERS:
This product can expose you to chemicals known to the State of California to cause cancer or birth defects and reproductive harm. For more information go to: https://www.p65warnings.ca.gov/
Tab 3
Tab 4