Eibach's PRO Series Wheel Spacers provide fine tuning for precise fitment of wheels and tires delivering increased track-width and improved styling. PRO Series Wheel Spacers for Tesla are the ideal solution for improving stability and handling, increasing clearance for larger tires, and giving your vehicle that aggressive and commanding presence. By widening the vehicle's track width, wheel spacers lower the center of gravity, reduce body roll, and ultimately enhance capability of your vehicle. PRO Series Wheel Spacers are intended for OEM Tesla Wheels, but may fit some aftermarket setups.
Eibach PRO Series Slip-On Wheel Spacers (10mm/15mm) Slip-on spacer systems range from 3mm – 25mm and require extended hardware for proper installation and simply slip on the hub. This hardware can be extended wheel bolts or extended wheel studs which require press-fitment into the wheel hub. Hardware is sold separately.
Eibach PRO Series Bolt-On Wheel Spacers (16mm/20mm/25mm/30mm) Bolt-on spacer systems range from 16mm-30mm and include fixed wheel studs or threads to allow use of original hardware and simply bolt to the hub. Bolt-on systems require the use of alloy wheels with pockets or cut-outs on the back-pad of the wheel in order for the wheel to sit flush on the spacer without interference of the original hardware. Required hardware is included.
Bolt-on PRO Series Spacer Kits Spacers can only be used with wheels that have cut-outs (facing the hub) to clear the stock studs. Please check as follows: Original stud length (i.e. 35mm) minus spacer-thickness (i.e. 25mm) = 10mm excess stud length. The cut-out should have a depth of 11mm.
Features
Widen Your Stance - For Better Handling
Bolt Pattern 5x114.3 / Hub Center 64
Made from High-Strength Aircraft-Aluminum Alloy
Precision Engineered Hub-Centric - for Perfect Fit and Wheel Balance
Reduced Weight Compared to Steel Wheel Spacers
Million-Mile Warranty
Note: Tesla Model Y wheels manufactured after 9/2021 are using different wheel castings, even though the designs are unchanged. These later model OEM wheels have shallower pockets on the wheel hub that will not allow the use of a 10mm or 17mm H&R spacer. If unsure, please contact us before ordering to make sure you get the correct fitment.
Eibach does not guarantee fitment, height or warranties on unlisted applications.
Vehicles Supported Tesla Model 3, including Performance Tesla Model Y, including Performance
