Paragon Performance 2-Piece Rotors offers superior braking and cooling efficiency optimized for track and race applications. It features directional ventilation vanes to create suction, turbulence, and guides cool air through the rotor for improved heat dissipation and increased resistance to cracking under harsh track conditions.
Made of CM-250 special formulated high carbon alloy cast iron, it allows for an optimal bite, thermal characteristics, high-temperature strength and durability. Rotor rings are heat treated to release stress in the rotor to avoid deformation and vibration then turned by state-of-the-art CBN surface machining to ensure better break-in with new brake pads.
Vibration is reduced as the rotor lateral run-out is kept within 0.03mm and well-balanced: variations are kept within 2 grams. All rotors went through rigorous quality control procedures and inspections to ensure the rotors are fit for their purposes. The floating 2-piece design allows thermal expansion of the rotor while minimizing deformation and ensuring the rotor is self-centered with the pads. A slotted rotor improves braking consistency by maintaining a clean contact surface and dissipate heat generated and gases released when the pads come into contact with the rotors. Slotted rotors have a superior advantage over blank rotors in wet or raining conditions by preventing water films to form between the brake pad and rotor surface. Weighing less than most O.E. rotors while maintaining proper thermal capacity, our 2-piece rotors improves overall handling by saving unsprung mass.
| Vehicle |
OEM Rotor
|
350mm Sport Rotor |
370mm Sport Rotor
|
380mm Sport Rotor |
OEM Rotor Thickness |
350mm Sport Rotor Thickness
|
370mm Sport Rotor Thickness
|
380mm Sport Rotor Thickness
|
OEM Cooling Vanes |
Sport Rotor Cooling Vanes |
| Model 3 Standard/Long Range |
335mm, fixed design |
350mm, 2-Piece Floating |
370mm, 2-Piece Floating |
n/a |
20mm |
20mm |
n/a |
n/a |
Pillar |
Directional |
| Model Y Standard/Long Range |
335mm, fixed design |
350mm, 2-Piece Floating |
370mm, 2-Piece Floating |
n/a |
20mm |
20mm |
n/a |
n/a |
Pillar |
Directional |
| Model 3 PUP/Performance |
335mm, fixed design |
n/a |
370mm, 2-Piece Floating |
380mm, 2-Piece Floating |
22mm |
n/a |
23mm |
23mm |
Pillar |
Directional |
| Model 3 PUP/Performance |
335mm, fixed design |
n/a |
370mm, 2-Piece Floating |
380mm, 2-Piece Floating |
22mm |
n/a |
23mm |
23mm |
Pillar |
Directional |
| Model Y Performance |
335mm, fixed design |
n/a |
370mm, 2-Piece Floating |
380mm, 2-Piece Floating |
22mm |
n/a |
23mm |
23mm |
Pillar |
Directional |
Aluminum hats are CNC machined from lightweight 6061-T6 aerospace grade aluminum for high strength and durability under extreme track conditions, then black hard coat/hard anodized to increase resistance to wear and corrosion. Mil-spec Type III anodized hats will not discolor under extreme heat, and are harder and more wear/scratch resistant. Unnecessary materials are taken out from the aluminum hats for maximum weight savings while maintaining proper structural integrity. Black anodized hard coat and standard hard coat hats are the same in terms of performance and durability.
350mm Rotor Features (Model 3 Standard/Long Range)
- Direct bolt-on without any modifications and designed to work flawlessly with OEM ABS and brake system while maintaining factory brake bias.
- Compatible with OEM brake pads or aftermarket pads with the same pad depth (D)
- Directional ventilation vanes for optimal cooling performance and increased resistance to cracking. Run up to 30% cooler than O.E. rotors and increase cooling efficiency
- Increases rear rotor diameter by 15mm/0.59" (4.2%)
- Floating 2-piece design
- Steel caliper carriers included to accommodate increased rotor size
- Minimizing brake fade & judder during extended sessions
- Great upgrade from non-directional, pillar vane OEM rotors
- Rotor to hat mounting system: D-Bobbin (long) - 10 bolt
- Trimming or removal of the OEM dust shield required
- Requires 18" or larger wheels for proper clearance
- Direct replacement of OEM 335x20mm Tesla part #1044631-00-D
370mm Rotor Features (Model 3 Standard/Long Range)
- Direct bolt-on without any modifications and designed to work flawlessly with OEM ABS and brake system while maintaining factory brake bias.
- Compatible with OEM brake pads or aftermarket pads with the same pad depth (D)
- Directional ventilation vanes for optimal cooling performance and increased resistance to cracking. Run up to 30% cooler than O.E. rotors and increase cooling efficiency
- Increases rear rotor diameter by 35mm/1.37" (9.4%)
- Floating 2-piece design
- Steel caliper carriers included to accommodate increased rotor size
- Minimizing brake fade & judder during extended sessions
- Great upgrade from non-directional, pillar vane OEM rotors
- Rotor to hat mounting system: D-Bobbin (long) - 10 bolt
- Trimming or removal of the OEM dust shield required
- Requires 19" or larger wheels for proper clearance
- Direct replacement of OEM 370x20mm Tesla part #1044631-00-D
370mm Rotor Features (Model 3 PUP/Performance, Model Y, including Performance)
- Direct bolt-on without any modifications and designed to work flawlessly with OEM ABS and brake system while maintaining factory brake bias.
- Compatible with OEM brake pads or aftermarket pads with the same pad depth (D)
- Directional ventilation vanes for optimal cooling performance and increased resistance to cracking. Run up to 30% cooler than O.E. rotors and increase cooling efficiency
- Increases rear rotor diameter by 35mm/1.38" (9.4%)
- Floating 2-piece design
- Steel caliper carriers included to accommodate increased rotor size
- Minimizing brake fade & judder during extended sessions
- Great upgrade from non-directional, pillar vane OEM rotors
- Rotor to hat mounting system: D-Bobbin (long) - 10 bolt
- Trimming or removal of the OEM dust shield required
- Requires 18" or larger wheels for proper clearance
- Direct replacement of OEM 335x23mm Tesla part #1044636-00-D, 1188636-99-A
380mm Rotor Features (Model 3 PUP/Performance, Model Y, including Performance)
- Direct bolt-on without any modifications and designed to work flawlessly with OEM ABS and brake system while maintaining factory brake bias.
- Compatible with OEM brake pads or aftermarket pads with the same pad depth (D)
- Directional ventilation vanes for optimal cooling performance and increased resistance to cracking. Run up to 30% cooler than O.E. rotors and increase cooling efficiency
- Increases rear rotor diameter by 45mm/1.77" (11.8%)
- Thicker 28mm rotor, vs. stock 25mm. Increases thermal capacity
- Floating 2-piece design
- Steel caliper carriers included to accommodate increased rotor size
- Minimizing brake fade & judder during extended sessions
- Great upgrade from non-directional, pillar vane OEM rotors
- Rotor to hat mounting system: D-Bobbin (long) - 10 bolt
- Trimming or removal of the OEM dust shield required
- Requires 20" or larger wheels for proper clearance
- Direct replacement of OEM 335x23mm Tesla part #1044636-00-D, 1188636-99-A
Includes (based on configuration)
- Paragon Performance 350/370/380mm x 20/23mm 2-piece rotor assemblies with black hard coat/hard anodized 6061-T6 aerospace grade aluminum hats, stainless steel bobbins, and anti-rattle clips (assembled and ready to install)
- Steel caliper carriers
- Detailed installation manual
Vehicles Supported
Tesla Model 3, including Performance
Tesla Model Y, including Performance
