Powerflex Transmission Mount Bushings are transmission mount that will fit many different models of BMW throughout the years. This is available in 3 different versions.
- Performance: 80A Durometer
- Black Series : 95A Durometer
- Heritage: 70A Durometer
These bushings are designed with street and track in mind to replace the tear-prone soft rubber mounts, which is a common cause of knocking, mis-shifting and over-revving. Made using CNC machined Aluminum Caps with captive securing bolts and a Yellow 70A Durometer polyurethane body, they increase stiffness over OE by 150%, while minimizing NVH transmission.
Aside from the Street Series offering, they are available in stiffer Purple 80A material for Performance use (260% stiffer) and Black Series 95A material, mainly intended for track use (375% stiffer) for those wanting to further reduce drivetrain movement. The harder the material used, the less deflection they offer and the higher the NVH transmission.
Features
- Position #55 on diagram
- Sharper throttle response
- Improved gear shifting
- More direct power transfer
- More balanced on/off throttle handling
- Prolonged life of the OE mount
A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine and chassis. The harder the material used, the greater the NVH transmitted.
Vehicles Supported
BMW E82 1M Coupe
BMW F87 M2, including Competition
BMW E36 M3
BMW E46 M3
BMW E9X M3, including Competition
BMW F8X M3/M4, including Competition
BMW E39 M5
BMW E36/7 Z3M-Coupe/Roadster
BMW E85/E86 Z4M-Coupe/Roadster
⚠️ WARNING TO OUR CALIFORNIAN CONSUMERS:
This product can expose you to chemicals known to the State of California to cause cancer or birth defects and reproductive harm. For more information go to: https://www.p65warnings.ca.gov/
Tab 3
Tab 4
