EAS - OE Performance Brake Upgrade Kit


Our Performance Brake Upgrade Kit includes everything you need to noticeably improve the braking performance of your BMW on a budget! The combination of Cool Carbon S/T Performance Brake Pads, Goodridge Stainless Steel Brake Lines and two bottles of ate Racing Brake Fluid will firm up your brake pedal, drastically reduce fade and increase stopping power. This kit is perfect for occasional track day visits, high performance driving schools or aggressive canyon carving. This package will also save you some money over buying each component separately.

Performance Brake Upgrade Kit Includes:
- (1) Cool Carbon Street Performance / Track Tuned (S/T) Brake Pad Set - Front
- (1) Cool Carbon Street Performance / Track Tuned (S/T) Brake Pad Set - Rear
- (1) Goodridge G-Stop Stainless Steel Brake Line Kit
- (2) Bottles of ate Super Gold TYP 200 DOT 4 Racing Brake Fluid

Cool Carbon Street Performance/Track Tuned (S/T) Brake Pads
This compound is a higher friction level than OEM, with much better torque and stopping capability. It is very stable, both cold and hot to temperatures exceeding 450° C (842° F), due to a special "hollow" ceramic structure that exhibits excellent heat dissipation characteristics. Updated constrained layer noise shims, bonded to what is already a very quiet formula, minimize possibility of noise under all driving conditions. Improved pedal feel and significantly reduced dust can be expected.

Goodridge G-Stop Stainless Steel Brake Lines
Goodridge stainless steel brake line kits feature the finest quality hose, consisting of a PTFE inner with a stainless steel outerbraid. This eliminates the spongy feel under arduous conditions, giving greater braking efficiency as well as providing superior resistance to abrasion and corrosion. These kits, therefore, not only provide the reliability and safety demanded but offer brilliant good looks that improve the appearance of any installation. The Goodridge brake line kits are direct bolt-on replacements for the OEM rubber hoses.

ate Super Gold TYP 200 Dot 4 Racing Brake Fluid
ate TYP 200 DOT 4 has a dry boiling point of 536F and a wet boiling point of 396F. ate TYP 200 is compatible and will mix with most DOT3, DOT4, or DOT 5.1 fluids. This top-of-the-line product lies 20C over the DOT 5.1 standard and surpasses this standard in nearly all the other requirements as well. This means that cars can go without a brake fluid change for up to 3 years while products with a lower wet boiling point have to be replaced considerably more often (e.g. DOT 3 products should be replaced annually).

Models Supported
2008+ BMW E82/E88 1-Series
1995-1999 BMW E36 M3
1999-2006 BMW E46 3-Series & M3
2006-2013 BMW E9X 3-Series & M3
2004-2010 BMW E60/E61 5-Series & M5
2003-2008 BMW E85/E86 Z4 & Z4M