Mishimoto - Oil Cooler Kit - BMW F8X M2C, M3 & M4

SKU
MSH0035
$841.95

Add some much needed durability and cooling power to your M2C/M3/M4 with the Mishimoto Oil Cooler kit. True to form, the engineers at BMW designed the M3/M4’s oil cooler with an efficient use of space in mind. Suspended perpendicular from the rest of the cooling stack, this location utilizes the Bimmer’s aerodynamics in order to cool the oil, all while putting the light weight, tube-and-fin cooler in harms way of road hazards.

Add some much needed durability and cooling power to your M2C/M3/M4 with the Mishimoto Oil Cooler kit. True to form, the engineers at BMW designed the M3/M4’s oil cooler with an efficient use of space in mind. Suspended perpendicular from the rest of the cooling stack, this location utilizes the Bimmer’s aerodynamics in order to cool the oil, all while putting the light weight, tube-and-fin cooler in harms way of road hazards.

We here at Mishimoto made sure to beef up the entire oil cooling system design for the F87/F80/82 with our performance oil cooler. We ditched the lightweight design for a full aluminum, TIG-welded bar-and-plate cooler for added strength and cooling. The bars and plates are a much more robust form of heat exchanger core construction intended for improved heat transfer and have the strength to shrug off potential road debris, keeping your oil temps down and where it should be. We also added 10mm to the core's thickness, equating in a 46% increase in core volume, and increased the oil capacity by .4 qt.

In addition we wanted to add an extra degree of protection to the system by improving on the lines. From the factory, these vehicles are equipped with unforgiving hardlines that are prone to abrasion and corrosion damage. Our oil cooler kit provides a pair of application-specific, flexible, and robust nylon braided lines for a more secure channel for your M's oil. Also included are our specially designed adaptors allowing for AN fittings from the S55's oil pump and a secure connection to the oil cooler.

The Mishimoto M2C/M3/M4 Oil Cooler Kit fits directly in place of the stock unit, and includes the Mishimoto Lifetime Warranty for a simplified and worry-free installation.

 

 

Features:
- Direct fit for the 2015–2020 BMW F8X M3, M4, and M2 Competition
- Kit includes oil line fitting kit, along with oil cooler adapters for use of nylon braided lines
- Full aluminum TIG-welded construction
- 46% increase in core volume
- Increases oil capacity by .44 quarts
- Robust bar-and-plate construction for improved durability and heat rejection
- Silver powder-coated finish for maximum protection
- Application-specific nylon braided hoses with -10AN fittings
- No cutting or modifications required
- Mishimoto Lifetime Warranty

 

Purchase Includes:
- (1) Oil Cooler
- (1) 1ft, 10in Nylon Braided hose with 45° and 70° -10AN Fittings
- (1) 3ft, 3in Nylon Braided Hose with 45° and 90° -10AN Fittings
- (1) Oil Line Fitting Kit
- (2) Application Specific Oil Cooler Adaptors
- (1) Braided Line Separator Bracket
- Mounting Hardware
- Mishimoto Lifetime Warranty

 

Models Supported:
BMW F87 M2C
BMW F80 M3
BMW F82/F83 M4


WARNING: May contain items that are found to have compounds and/or chemicals known to the State of California to cause cancer, birth defects, and reproductive harm.
For more info, please visit https://www.P65Warnings.ca.gov.