If one is great, dual is better. SmartyCam 3 Dual is the flagship version of SmartyCam 3 range, designed for any racer who wants to get the most out from any performance video on the track. Dual Full HD camera system, Video output, CAN connection, USB-C connection, Ethernet port are only few of the features of SmartyCam 3 Dual: the most powerful of our range. The new SmartyCam 3 Dual has been designed for motorsport with a single purpose: Providing great videos including all the data you need. SmartyCam 3 Corsa camera overlays all the data from both GPS and AiM loggers connected to your ECU.
Dual Video Output SmartyCam 3 Dual features a video output with SDI interface. It allows to send the video/audio stream to a streamer at 30 or 60 fps to perform a video streaming.
Video Analysis with Analysis 3 The video of a whole session, once downloaded on your PC, can now be split - with a simple click - in individual videos of each lap: so that you can simultaneously watch two of them and check where you were faster or slower. The same operation can be performed with a SmartyCam 3 Sport video recorded on the same track: you will be able to compare your best lap with your friends personal best!
Kit Contents
SmartyCam 3 Dual Module
(2) Bullet Cameras
(2) Bullet Camera cables
Standard & Ethernet Harness
Technical characteristics
Video format: H.264 1920 x1080 pixels @ 60 fps
Internal battery Rechargeable lithium battery
Display resolution: 2.4" 240 x 320 pixels
Field of view: 67°, 84° or 120°
Lens: Low distortion camera lens
Auto Power OFF: Yes
Weight: Main unit 800 g, Bullet 45 g
Waterproof IP65
Auto Start/Stop Recording: Yes
Auto Power ON: Yes
External power: 9-15 Volt
Usage temperatures: -10°C/+50°C
Supported SD card: Up to 2 TB
Connectors: 1 Deutsch 22 pin + 1 SMA SDI Video out + 2 SMA bullet connection + 1 USB-C
CMOS sensor Global Shutter
Video Out: 3G-SDI
Body: Anodized Aluminum
Dimensions: Main unit 154.4 x 109.6 x 42 mm, Bullet camera 24 diam x 46.0 mm (120° lens), Bullet camera 24 diam x 41.0 mm (67°-84° lens)
Bullet Cable length: From 0.5 m to 4 m (7 lengths available)
With RaceStudio 3 software you can configure your overlays in a virtually infinite variety of ways: add your logo and the track map and choose your graphic objects from a list of pre-determined sets with same layout or even single objects from different sets. Your videos will be truly "yours" in all details, from the data to their graphic layout.
Full internal datalogger All data received from the CAN bus and from the internal sensors are recorded in .mp4 files produced at the end of your test, your SD (or MSD) Card contains all the information you need for a deep data analysis. SD card sold separately.
Designed for the extreme An on-board camera designed for motorsport must guarantee great resistance against the extreme working conditions typical of racing and against the most adverse weather. That is why SmartyCam 3 Corsa is IP65 waterproof made in machinery molded aluminum, PA fiberglass reinforced and features sapphire frontal glass for a complete protection.
Automatic Start & Stop You have other things to think about while you are racing and SmartyCam 3 is aware of that. That is why it switches on/off automatically and starts/stops recording in the same way.
No "Wave Effect" with Global Shutter CMOS Engine rumble causes vibrations, which are a big problem for video recording. You will never experience again that seasick “wave effect” you get watching videos recorded by a generic camera when the car rolls at 7,000 RPM. SmartyCam 3 cameras have been designed for that environment and for those vibrations. “Wave effect” is just a distant memory.
High quality with small size video files Generic HD cameras are focused on the highest pixels number. The result is that their video files are far too large, taking too much memory; for this reason SmartyCam 3 videos have the same quality as other FHD cameras but their files are smaller because the H.264 compression system parameters have been optimized to perfectly balance video quality and file size.
