Introducing Eventuri's revised G8X M2/M3/M4 intake for fitment with the CSL Strut Brace. The V2 G8X intake is now compatible with both CSL and non-CSL strut braces and is being offered in both gloss and matte finish.
Eventuri carried out intensive R&D to develop an intake which not only improves on the stock M3/M4 but also is future proof in its capacity to cater for high powered builds well in excess of 1000hp. This system is a complete redesign from the airboxes to the turbo inlets with the aim of reducing pressure loss while increasing the flow rate and keeping inlet temperatures low. Eventuri has maximized the usage of the available space to employ 2 custom made filters with a 40% larger filtration area than stock. These are used in Patented Venturi housings to smoothly funnel the air to the turbo inlets. The inlets themselves are up to 160% larger in cross sectional area than stock and are designed with an advanced dimpled inner surface to reduce frictional losses between the flow and the wall boundary. By allowing a “cushion” of air at the wall surface, airflow is able to move through the inlets at higher flow rates with reduced pressure loss. This allows the turbos to draw air with less resistance and therefore reduce the wastegate duty cycle resulting in higher overall performance.
